AST NUP211 E cylindrical roller bearings

Recommended tightening torque for set screw:8 Nm; S:9 mm; H2:82 mm; Designation of housing:PE206-; s1:27.8 mm; L1:47 mm; A:40 mm; A1:25 mm; N:14mm; Weight:1.15 kg;

A:48 mm; J:121 mm; Designation of bearing:UC206-20G2T04; Designation of closed end cover:SCC206; N:17mm; Z:53 mm; Dz:70 mm; H:42.9 mm; H2:83 mm; T max.:100 °C;

d1:147 mm; Brand:NTN; d:105 mm; EAN:4547359124040; Minimum Buy Quantity:N/A; Snap Ring:No; Long Description:105MM Bore; Straight; Dynamic load, C:320 kN; Weight / LBS:19.382; Characteristic outer ring frequency, BPF0:5.73 Hz;

Designation of bearing:US201-08G2T20; T min.:-20 °C; Dz:46 mm; A1:11 mm; J:76.5 mm; d:12.7 mm; S:6 mm; G:M6x1; Recommended tightening torque for set screw:3.2 Nm; Designation of closed end cover:SCC203;

A1:28 mm; C:19.5 kN; A:50 mm; C0:11.2 kN; J:121 mm; Weight:1.74 kg; Designation of housing:PH206N-; N:17mm; S:15.9 mm; L1:56 mm;

Designation of housing:T211N-; d:50.8 mm; H:146 mm; Designation of closed end cover:SCC211; H1:130 mm; Z:76.8 mm; A5:33.4 mm; N2:64 mm; L3:95 mm; Recommended tightening torque for set screw:16.8 Nm;

d:66.68 mm; Nlim (grease):2,900 rpm; Characteristic inner ring frequency, BPFI:11.27 Hz; ra max:3.5 mm; Nlim (oil):3,800 rpm; Category:Roller Bearings; e:0.5; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:8.73 Hz; Minimum Buy Quantity:N/A;

J:184 mm; S:11.8 mm; L:134 mm; C0:29.2 kN; e:28 mm; T max.:100 °C; Designation of bearing:US211-35G2; C:43.55 kN; B:45.3 mm; G:R1/8";

da min:19 mm; d:17 mm; Mass:0.03 kg; B:26 mm; t:1.5 mm; Lubrication hole on inner ring:Non/No; Precision class:P0; F:22 mm; rs min:0.3 mm; ras max:0.3 mm;

Housing Type:Wide Slot Take-Up; Bearing Locking Device:Setscrew; UPC:782475696383; Expansion Type:Non-Expansion; Shaft Attachment Type:SETSCREW; Grease Type:Mobilgrease XHP222; Housing Series:215 SERIES (211 - 30; Setscrew Angle:65; Bearing Series:215 Series; Seal Type:Triple Lip;

T min.:-40 °C; Designation of closed end cover:SCC213; L:188 mm; C:57.2 kN; S:25.4 mm; Dz:132 mm; e:38 mm; T max.:100 °C; C0:40 kN; A2:77.7 mm;

A2:116.3 mm; Recommended tightening torque for set screw:120 Nm; S:43.6 mm; Designation of housing:FL318-; H:385 mm; s1:80.15 mm; A1:36 mm; d1:133 mm; N:38mm; A:76 mm;

T max.:200 °C; C:9.55 kN; d:17.46 mm; H1:10 mm; Dz:46 mm; H2:57 mm; E:9 mm; Designation of bearing:US203-11G2T20; A1:19 mm; N:M8;

Dw:2.5 mm; C1:14 mm; C:32 mm; Ca:45.5 kN; da min:61 mm; k:3 mm; Product Group:B04144; dw:45 mm; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C;

L1:225 mm; L:264 mm; Designation of closed end cover:SCC204; Dz:54 mm; Designation of bearing:UC203G2T04; C:12.8 kN; C0:6.65 kN; G:R1/8"; A5:18.3 mm; Designation of housing:SP203-205/47N-;